11cummings

When you coming back @Synergypharma been a while took a long break myself time to get back at it. 

All I’m gonna say is I hear the tren train coming . I love it but it does make me a little wacked out at times. I almost feel like a super hero or some shit just all around feel better.

The first time I tried tren... I felt the amazing strength, fat loss and great sleep BUT I also noticed the side effect of dizziness when standing and as if the room would spin at times.... this lasted 2 weeks from the beginning of tren use and even now I just started a 4 week cycle of tren and once again I fell the dizziness and light headedness but not as bad as the very first time of tren use. My blood pressure is good so not worried about that. And when I'm off tren there is NO DIZZINESS or LIGHTHEADEDNESS.... my question: Is this normal? What effects does tren have on the brain ? And does anyone else have dizziness or room spinning with tren use? (Me: 40 year old male.. fit.. do cardiovascular for good blood pressure.. no medicine needed for blood pressure or anything with heart.)

I get it sometimes when I’m running tren real hard 600 a week or so and it’s low sugar I feel like I’ll get me some candy and eat quite a bit of it. From what I have read you will need to eat more because the tren is burning through all the fuel you are feeding it and it’s not enough I have been smashing all kinds of food this time and it has been better.

I was hoping a few vets could take a look at this blood work. This was off my first cycle off my own gear. I’m hoping it looks good and that I got the gear dialed in pretty good gonna tweak it some and see if I can get rid of the pip. I don’t wanna mention the source because I made it myself and could have made a mistake raws checked out on the melt test. Tren will give you the cough that you read about and never get it will put your ass in the floor sweating instantly lol!!!

I pump mine up around 20 with a glass media bottle. I’m gonna try the mct oil and some eo to try and get the pip out of my test it only bothers me in certain spots. I’m a puss though lol.

Are you running hcg during your cycle?

No I’m not I have read a little on it but not really got in depth with hcg

U.s. med sci is what it says I had my family doc start helping me with my blood work.

I’m gonna get some ai’s but I have been reading and there is a ratio of test to estrogen. So you think 576.9 free and greater than 1009.4 is low this is why I wish I knew what theactual total was I hate when they just put greater than a #. This is 7-8 cycle for me and actually felt great

I couldn’t read the first images maybe these are better not sure why they were upside down

I got my blood work back and not sure on the estradiol level I’m not sure about the number because it wayyyy high and I have zero Gyno problems I never have. I also wish I knew what the really testosterone number was and way to convert the free to get around about total? Also could the tren be throwing the estradiol number off?

I was on 1000 mg test e a week and 600mg of tren ace. Felt pretty good most of the cycle ran it almost 20 weeks and got blood work at the begenning and the end.

On the bass killer calculator u need to enter the powder displacement number in to get the correct calculation it use to be at the bottom but it’s not now. I’ve use it and it’s dead on. You don’t need that much alcohol either I use 1/15 for e sometimes less on the B.B. you have to play with it and get it like you want it. I’m trying I get my gear dialed in. I’m gonna work on getting it thinner now changing the carrier so I can pin with a 27 ga. Have fun brewing and keep everything clean and steril if you are gonna use less alcohol when you brew.

No she has not this is the first time I’m trying to just take it slow I wanted to see her results first and see her committed to her training.

I’ve got her some anavar and some hgh to try. I’m trying to get the dosing for the hgh right it says 1.5 a day but that seems low women are different I know. Do u think 25mgof test e a week would give her masculine sides or does it need to be prop. I usually just stick with e but I have some sust on hand also. I’m gonna make her some of her own stuff so that I know exactly what’s in it.

My wife has been training with me for a while now and also with a personal trainer that has won body building shows at the state level. She is really itching to try some sort of steroids I am just not sure what to let her try. She is not going for the bikini model look more of a toned thick thy and ass kind of look and strong, she already getting strong. Any of the women out there have any advice I know anavar is a choice but she is also looking for fat loss. I'm just mot sure about so so g and combining compounds to get the results she's looking for. For me its test and tren and mast and lots of it as I brew my own. Any advice you lady's have would be greatly appreciated.

Brewed my first batch this week also 500ml tren ace 100 mg and 400 ml of test e 250mg. I used the basskiller calculator it was legit. Went with 15 bb/ 1ba on the test and 18/2 on the tren. It came out perfect no pip or anything. Get you a brake pump and a glass media bottle I get a 1000 ml one on eBay for cheap and a 500 ml Pyrex beaker. I washed everything and then cleaned with alcohol and baked it to dry and sterilize. I used the millipore filters I did notice about 300 ml is all they wanna filter it slows way down so I had 4 and just changed it out lost a little on the end of the last test batch playing with the pressure when I noticed it on the tren batch i lost a little transferring to a new filter I won't put more than 300 through one again. The tren looks like Apple juice last time I had some this clear and golden looking it was fire as hell. The filters do not need ran over 15-18 with the glass bottle. If u use the plastic it's way less. I need to run this for a while maybe 8 weeks and get blood work. I ended up with 36 bottles of test and 48 bottles of tren. I did something different on the heating I boiled the water and pulled it off when I quit seeing the steam put the beaker in the pandora a few seconds while I stured it kep a Check on temp and it never even got hot just Luke warm and dissolved quickly. I am happy with it I think I'm gonna try some mct oil next time instead of gso but this is smooth and will go through a 25 g pretty easy just takes a little bit. I have been reading and studying for almost two years I wanted to get it right when I tried it and it paid off.

Once its filtered into the reciever bottle how exactly do we transfer to the sterile vial?

I got some 60 ml syringes and some 30s in gonna use with tubing on the big one and when the receiver gets low I have the 30s with the lure lock and 18ga needles to get all of the gear put that I can.

Im very confused about this also.. were in the same boat... more info.

I'm glad that I am not the only one that feels this way. I'm hoping some of the vets put their 2 cents in on this. I have the millipore ones coming but I will buy more if they are incorrect. I found a full glass setup and that you can change the filter on also but the filters are really cheap just have to worry about sterilization every time and then the correct filter material also.

I know there are a lot of threads on filtering and I have read them all and about half ass confused on what really works and what doesn't. I know the good ones are nalgene, millipore, whatman. With that being said the material the filter it's self is made of what is the best for a clear brew. I was gonna get millipore 250 ml .22 pvfd filters but now I'm not sure Is that the correct type of filter. I see a lot that are made of polystyrene, pes, ptfe, nylon which one is correct. There is also a brand called celltreat and autofil are either of these any good they are a viable in a lot of the listed materials and have up 1000ml containers I am starting with the 250s for now but I know this is not gonna slow down for me it's just the begenning. Thanks for the info and feed back I just think I have read soo much trying to get this right that I have confused myself.

I dunno it depends on how much is stuck I guess. But let's say your brew will be 2/20% ba/bb. Maybe squirt that amount into the baggie, swish it around till the raws dissolve, pour into beaker and then add the rest of your raws(account for raws you got from the baggie, but I can't imagine it being a lot to make much of a difference).

 

I would just chock it up as a loss tho. If you got the raws for a decent price test is cheap enough. Maybe if it was exotic and expensive I'd go through the trouble

I was thinking of just making 390 ml and making sure I get the dosing right. Just chock it up as a loss and lesson learned. I just don't get how it will dissolve when it is soo solid and pure white. Have you made it with less bb like 10-15% and 1% ba I'm thinking of trying it I want it to be smooth and painless.

I dunno it depends on how much is stuck I guess. But let's say your brew will be 2/20% ba/bb. Maybe squirt that amount into the baggie, swish it around till the raws dissolve, pour into beaker and then add the rest of your raws(account for raws you got from the baggie, but I can't imagine it being a lot to make much of a difference).

 

I would just chock it up as a loss tho. If you got the raws for a decent price test is cheap enough. Maybe if it was exotic and expensive I'd go through the trouble

It was about 85/90 degrees outside when it came in it was solid and I moved it in the baggie a little and it left a waxy residue on the baggie. I shouldn't have messed with it lesson learned. This is my first brew and I just wanna make sure I get it right. So for pure test e I should see it melt between 90-96 degrees I have some stuff ordered including the laser temp gun. The percetage off bb I was gonna try 10 and 1-2% ba I'm hoping to get away with 1% gonna just start with the gso but I have some mig840 also. I have 100g so I'm gonna end up making 400ml @ 250 total. Would I be better off just making a 20bb and 2ba to get it thin I want it to be painless. I love this forum soo many ppl with all great info and helpful.

Test e came in and its warm so it was solid like a brick but there is some residue on the baggie like waxy feeling. I know this is normal because of the shipping heat and everything. It's Snow White and the smell is on point haven't heat tested it but I'm leaning toward really pure Raws. Is there a good way to get this off the baggie or just chock it up as a loss.

Test e at 250mg/ml should be fine with no BB, but you could add a little just to be sure it holds. I have always brewed test e, I have a little test c powder to try. Test c is supposed to be harder to brew then test e. For test c im going to start with around 5-7% BB, and see if it holds. If it doesn't I will add BB slowly until it holds.

 

My last batch of tren ace from component TH has 18% bb

So don't use the bb at all or just do like 10% bb and 2% ba. Most recipes give 18% bb and 2% ba I want it to be smooth and I was looking at the post dates and thinking that some of the posts were old and things have evolved. I though the pip came from the ba so I need to keep it low.

I have read a lot of recipes and get a lot of different opnions. I'm wanting to keep it simple for awhile so I'm gonna go with grape seed oil and ba2% and 18-20% bb. I've seen where the stickies say 3%ba and 15%bb it is an old thread and I'm just double checking and making sure I get everything right and try to keep the pip to a minimum. I'm gonna use bottle top filters and a glass media bottle with a brake pump. What kind of pressure should I keep it at I've seen anywhere from 7lbs -13-14lbs? I'm gonna make 400ml of test e and c 250 and 500ml or tren ace 100. I have been looking at mct oil for some future brews maybe a small amount of eo pinning with a 27g would be nice in my pecs and stuff anyone have any tips for using the mct carrier.

Totally understand the late reply. Whey you say one batch that could be 500ml plus once I get the first small one down. U think it will be fine? I got a 1000ml glass media bottle and 12 bottle top filters. What kind of pressure are you running.