DavidLee14

Welcome to AB.

Welcome to AB!!

So where did you get this number, or is it a guessitimate?

Blood levels are usually 6x the amount your dosing.

Welcome to AB.

Good. Glad they worked out for you my man

 

Soft tabs? I'm curious on this as they should be fairly firm but can happen if the press isnt set hard enough

Anyone else experience this?

 

K.

 

----

I just cut one in half to answer your question. The ones I got are a little brittle. I don't cut mine in half anyways because a whole one delivers the full ground n pound effect my girl desires....;)

Welcome to AB.

 

I sent out I think 5 sample packs to guys. So, hope they chime in to

 

K.

 

---

I received one of the samples as well and took the Cialis 25mg for a test drive. They are still just as potent as the ones I purchased a year ago from ALP. These are definitely good to go. As always, thank you, K.

i'll need a few guys to test this new Cialis 25mg batch we got

lmk here if your interested. Regular AB guys only please

 

K.

 

----

Just shoot some to the lab rat.

On my 8th week of using TE 500. I have been pinning 1ml wk, but I went ahead and pinned 1 1/2 ml to give feedback on the PIP. I pinned my glute on Weds and I'm really sore today, Friday. Absolutely a 6-7 0n the 1/10 PIP scale. My muscles were adapting well to the full 1ml pin on the second rotation to that muscle with very little PIP. The extra 1/2 ml definitely made it feel like a first time pin with the same resulting PIP. I'm good with just 1ml at a time...;) Awesome gear, Karius, thanks for letting me take it for a test drive.

Sorry to hear this. My family's prayers go out to you.

do you think it would be possible to pin 1.5-2ml of the 500mg Test E Without bad PIP? ..

I wouldn't advise pinning a gram of the TE 500 into a virgin muscle not accustomed to high dosage gear. My first 1ml pin of the TE 500 was every bit of a 6 out of a 1/10 PIP scale. All my first pins to a new muscle were a 6/10 PIP. All my second pins were normal PIP. I'm on my 8th week of doing 1ml wk. Like Karius said you would be better off doing 1ml in 2 different spots.

20% seems to be it then! :)

 

I always run melting point tests before i make up anything. The TE/ND melted on point and fast within the range it was supposed to melt = high purity. 99%+ I'd say.

Any raw that falls under 98% you re-calculate and compensate for the lower than expected purity value by adding X percentage more.

 

 

Glad its working out for you!

 

K.

 

----

Yeah, I've pinned a small muscle and a large muscle with a full 1ml. I don't see any issues with the 20% BB TE 500. There are no doubts here about the purity and quality of this TE 500. :D

Oh, it's definitely working out for me.

On my 7th week of using TE 500. I switched over last week to using the 20% BB TE 500. I used a 25g pin this week and the 20% BB flowed through easily. I pinned my quad on Weds and as of today, Friday, very little PIP. This 20% BB is definitely a lot gentler on the muscle than the 10% BB. I think user friendly wise, the 20% is the ticket, Karius. The quality of this gear is second to none. My total Test blood work was a tad more than 6x the dosage I'm using. That speaks volumes for this gear. My workouts have been off the chain and my gains just keep coming week after week.

Wow!! That's unreal. Posing as all the Big Dawgs. What's bad is they have to be a member here on AB. They are following the updates.

Welcome to AB.

What week into the cycle did you have blood drawn?

On my 6th week of using TE 500 and pinned my 6th full 1ml on Weds. I switched over this week to using the 20% BB TE 500. I used a 23g pin thinking the oil would be a lot thicker than the 10% BB, but it was a barely noticeable difference. I see no problem pushing it through a 25g pin. I pinned 1ml in my delt on Weds. Barely any PIP on Thurs, but today the PIP is about a 4/10. I haven't used this Delt in my pin rotation so it's a first high dosage pin. All my first pins to a muscle have had descent PIP. Yet, the second pins are no different PIP from any other gear. This 20% BB has a lot less first pin bite than the 10% BB did. Got my bloods back that I had drawn on my 5th week. If nobody can open the PDF, I will have to have Karius post it.

[ATTACH]3235[/ATTACH]

Caxxis TE 500 Bloods.pdf

Welcome to AB!!

On my 5th week of using TE 500 and pinned my 5th full 1ml on Weds. The second pin to my quad yielded very little PIP. No different from any other gear I use. For some reason the first pin to a muscle using this high dosage TE 500 left that muscle sore for a solid 2 days, but the second pin to that same muscle left me experiencing very little PIP. I don't know if it's because the first initial pin of a concentrated high dosage is just a shock to the muscle and it irritates it, and the second pin the muscle is adapted to it so there is very little PIP. I have no answer for this phenomenon. I do know the quality of this gear is hitting me like a freight train. I backed off the heavy weights a year ago so I could persevere through my 50s without crippling joint pain. This entire week at the gym I was chomping on the bit to lift some heavy ass weight. I never get that urge when I'm on my 250mg wk cruise. I really believe this gear is dosed on point. I went this morning at 6am to get lab work so as soon as I get the results next week I will post them. Next week I am switching over to the 20% BB TE 500 to see what the PIP is like. Pin a big muscle and then a small muscle just like I did with the 10% BB TE 500.

One happy Lab Rat. Thanks, K ;)

On my 4th week of using TE 500 and pinned my 4th full 1ml on Weds. I pinned the quad that I haven't used in rotation yet to see if I would get the same 1st time PIP result. Pretty much the same result as all of my first time pins to a muscle. A solid 2 days of the muscle being really sore. My other quad had the same result on the first pin but the second pin to it was little to none PIP. I will see if the second pin to the quad I just pinned yields the same results next week. I'm going to switch from this 10% BB to a 20% BB when I start my 6th week. Had a great week in the gym. My strength is coming up and so is the scale on this 4th week. I had been on a 250mg wk cruise for awhile and it feels good getting back in the zone again. I almost forgot the difference between being at 250mg or 500mg wk. The quality of this TE 500 is second to none just as everything else that originates from there.

I'm pretty positive that's mostly genetics. The majority of african american people who are in jail eat that garbage and all those crap carbs yet, they can still workout, get big, and get ripped. My friend who's black can eat 3 big mac meals a day everyday and still stay f*cking shredded year round.

I know, right? Wish I had Jungle Genetics.

hmmm it's possible you've gotten used to the high mg

OR maybe something about your injection protocol was different than the 1st on that Quad? Deeper? Not as deep!? Longer pin?

 

 

Anyone else experience this?

I'll research..

 

K.

 

----

I used same gage pin. I use 1 1/2 needle for quads and glutes. I always bottom it out. I used a 1" needle when I pinned my shoulder last week. Next week I'm going to pin the quad that I haven't used yet and see if I get the same first time PIP result. Then pin it again in my rotation to see if I get the same second time PIP result as I just did. I've experienced kinda this same result with water based gear. The first pin is painful as hell, but the second pin in rotation was tolerable. The other tester had the same exact PIP when he did his first full 1ml as I did on my first full ml pin so I don't feel it's injection protocol, Karius.

On my 3rd week of using the TE500 and pinned my 3rd full 1ml on Weds. I thought about just testing the PIP on 3/4 ml, but I really want to stay in the 500mg wk range without doing multiple shots so I went ahead with another full 1ml. I pinned in the same quad that I did my first full 1ml in on week 1. I got a completely different PIP on this second rotation pin to that quad. Very little PIP this go around. No more PIP than any other gear I frequently use. I don't know if the 500mg high strength initial pin to that quad 2 weeks ago was just such a shock to the muscle and that's why it was so irritated and sore for 2 days, and now the muscle is accustomed to it with very little PIP this time pinning it. Karius or anyone else with high strength experience, please enlighten me on this phenomenon.

Try 3/4 of a mL. This seems to be smooth according to all the testers.

 

You agreed to test our 20% BB, its thicker but might work better than this 10% BB trial.

Perhaps the low BB in the T500 you have is causing the Test E to crystallize in the Depot and being such a high amount of hormone is causing PIP @ 500mg but seemingly fine at 375mg/mL

So we want a slower /smoother release of the hormone just like how EO works but ofc w/o the EO

 

Thanks DL!

K.

 

----

Yeah, next week I will try 3/4 of a ml to see what the PIP is like. I will probably just end up pinning 2x weekly so I can stay in the mg range I'm looking for. I will try the 20% BB. I'm sure it will push through a 21g pin just fine. I have faith in you, K, that you can get this high strength gear dialed in with low PIP. T500 with no EO and low PIP will put you in the Hall of Fame....lol